6-in-1 Filler Knife for a range of applications.
6-in-1 Putty Knife for multiple applications Removing joints and widening cracks for repair work Metal cap in the handle for hammering nails into plasterboard Putty knife for removing filler Nail puller integrated into the blade Recess in the blade for cleaning paint rollers Sharp blade for scraping off wallpaper and paint residue Soft-grip handle for extra comfort
Carrymate 5 carrying handle, clamping range 0–80 mm, 2 pieces
The Carrymate carrying handle is a health and safety-friendly aid for lifting, carrying and moving sheet materials and building components. It is gentle on the back and easy to handle. The self-adjusting clamping jaws provide a secure grip across the entire clamping range. Smooth surfaces make it harder to grip, and manoeuvring is more difficult when carrying through narrow passageways or over uneven floors. Carrying handles are used in pairs and are suitable for a wide range of materials. The ability to choose your own clamping point allows you to carry with your arm outstretched. With a load capacity of 100 kg per handle, this system covers virtually all portable items. - Load capacity per handle: 100 kg- Self-adjusting clamping system- Lightweight aluminium construction- Absolutely secure clamping across the entire clamping range- Protected handle to prevent damage- Packed in pairs
Carrymate Senior carrying handle (clamping range 40–120 mm), 2 pieces
The Carrymate carrying handle is a health and safety-friendly aid for lifting, carrying and moving sheet materials and building components. It is gentle on the back and easy to handle. The self-adjusting clamping jaws provide a secure grip across the entire clamping range. Smooth surfaces make it harder to grip, and manoeuvring is more difficult when carrying through narrow passageways or over uneven floors. Carrying handles are used in pairs and are suitable for a wide range of materials. The ability to choose your own clamping point allows you to carry with your arm outstretched. With a load capacity of 100 kg per handle, this system covers virtually all portable items. - Load capacity per handle: 100 kg- Self-adjusting clamping system- Lightweight aluminium construction- Absolutely secure clamping across the entire clamping range- Protected handle to prevent damage- Packed in pairs
Carrymate XL carrying handle (span 80–160 mm), 2 pieces
The Carrymate carrying handle is a health and safety-friendly aid for lifting, carrying and moving sheet materials and building components. It is gentle on the back and easy to handle. The self-adjusting clamping jaws provide a secure grip across the entire clamping range. Smooth surfaces make it harder to grip, and manoeuvring is more difficult when carrying through narrow passageways or over uneven floors. Carrying handles are used in pairs and are suitable for a wide range of materials. The ability to choose your own clamping point allows you to carry with your arm outstretched. With a load capacity of 100 kg per handle, this system covers virtually all portable items. - Load capacity per handle: 100 kg- Self-adjusting clamping system- Lightweight aluminium construction- Absolutely secure clamping across the entire clamping range- Protected handle to prevent damage- Packed in pairs
Carrymate® Flat Handle XL
The Carrymate flat-head tool is a sturdy tool for removing roofing materials, roofing felt, carpet and many other materials. It is also suitable for unrolling stretch sheets and similar materials. On the one hand, the handle protects hands and fingers, whilst on the other hand it also ensures greater force is applied with less effort. The new XL version makes it even easier for the user to get the right grip for the material being worked on. It is simple to use. Only a corner of, for example, a carpet needs to be torn off by hand. This corner is then placed between the “gripping shear/clamping system”. By tightening the pull handle, the item is securely clamped and can be pulled out effortlessly.
Carrymate® Portman™ extension piece
The Carrymate Portman extension fits the Portman XL and XXL. It can be easily attached, and the Portman is immediately ready for use.
Economy weeding knife.
Scrapers are used to remove old filler residue from grooves. When used in combination with the matching filling knives, they enable professional repairs to sealant joints. The “Don Carlos” brand is renowned for its professional quality, which meets the highest standards. HS Code: 8211 92 00.
Economy weeding knife.
Scrapers are used to remove old filler residue from grooves. When used in conjunction with the corresponding filling knives, they enable professional repairs to sealant joints. The “Don Carlos” brand is renowned for its professional quality, which meets the highest standards.HS Code: 8211 92 00
Economy Wooden Window Opener
Wooden window frames without knots. Glazing levers are used to position glazing units correctly. The Economy glazing lever is made from beech wood. It can be used as a lever wherever delicate materials need to be lifted. Length 280 mm Width 70 mm
EZL30-8/300-80 single-hand glue gun
Bessey EZL one-hand glue clamp. The EZ series of one-hand clamps offers a wide range of applications, thanks to a broad selection of variants in four sizes with clamping widths from 110 to 900 mm and clamping forces from 200 N to 2,700 N. This is achieved through the cross prisms integrated into the plastic protective caps, which allow round, pointed and angular parts to be securely clamped by moving the upper section from clamping to spreading. For the EZM, EZL and EZXL, clamping is achieved without any movement thanks to the push-button release mechanism. The complete range offers ergonomic operation thanks to advanced technology: the high-quality 2-component plastic handle with a pump lever behind the rails, ensuring a secure grip from both directions; and the release lever integrated into the handle for quick adjustment of the sliding bracket and release of the clamp. Here, modern aesthetics are combined with a long service life: through the use of high-quality materials such as glass-fibre-reinforced polyamide for the upper and lower sections, as well as finished and ground steel for the hollow profile rail; the plastic housing of the grip mechanism protects against dust and splinters. Can be converted for spreading, without tools, for EZM, EZL and EZXL models thanks to the simple release mechanism with a push-button on the upper section. Ergonomically shaped two-component plastic handle with pump mechanism and integrated release lever behind the rails. Rubber protective caps with cross-prism for secure support of round, sharp and angular parts. One-handed operation without requiring much force.
EZL45-8/450-80 single-handed glue gun
Bessey EZL one-hand glue clamp. The EZ series of one-hand clamps offers a wide range of applications; it can clamp and expand/spread, thanks to a wide variety of models in four sizes with clamping widths from 110 to 900 mm and clamping forces from 200 N to 2.700 N. This is achieved through the cross prisms integrated into the plastic protective caps, which allow round, pointed and angular components to be securely clamped by moving the upper section from clamping to spreading. For the EZM, EZL and EZXL, clamping is achieved without any movement thanks to the push-button release mechanism. The complete range offers ergonomic operation thanks to advanced technology: the high-quality 2-component plastic handle with a pump lever behind the rails, ensuring a secure grip from both directions; and the release lever integrated into the handle for quick adjustment of the sliding bracket and release of the clamp. Here, modern aesthetics go hand in hand with a long service life: through the use of high-quality materials such as glass-fibre-reinforced polyamide for the upper and lower sections, as well as refined and shot-blasted steel for the hollow profile rail; the plastic housing of the grip mechanism protects against dust and debris. Can be converted for spreading, without tools, for EZM, EZL and EZXL models thanks to the simple push-button release mechanism on the upper section. Ergonomically shaped two-component plastic handle with pump mechanism and integrated release lever behind the rails. Rubber protective caps with cross-prism for secure support of round, sharp and angular parts. One-handed operation without requiring much force
EZL60-8/600-80 single-hand glue gun
The EZ series of single-hand clamps offers a wide range of applications; conversion for spreading is simple and requires no additional tools, thanks to a wide range of variants in four sizes with clamping widths from 110 to 900 mm and clamping forces from 200 N to 2,700 N. The cross prisms integrated into the plastic protective caps allow round, pointed and angular components; by moving the upper section to switch from clamping to spreading; for the EZM, EZL and EZXL sizes, this can be done without any movement thanks to the one-touch release mechanism. The complete range offers ergonomic operation thanks to advanced technology: the high-quality 2-component plastic handle with a pump lever behind the rails, ensuring a secure grip from both directions; and the release lever integrated into the handle for quick adjustment of the sliding bracket and release of the clamp. Here, modern aesthetics go hand in hand with a long service life: through the use of high-quality materials such as glass-fibre-reinforced polyamide for the upper and lower sections, as well as refined and shot-blasted steel for the hollow profile rail; the plastic housing of the grip mechanism protects against dust and splinters.
EZM30-6/300-60 single-handed glue gun
Bessey EZM one-hand glue clamp. The EZ series of one-handed clamps offers a wide range of applications, thanks to a broad selection of variants in four sizes with clamping widths from 110 to 900 mm and clamping forces from 200 N to 2,700 N. This is achieved through the cross prisms integrated into the plastic protective caps, which allow round, pointed and angular parts to be securely clamped by moving the upper section from clamping to spreading. For the EZM, EZL and EZXL, clamping is achieved without any movement thanks to the push-button release mechanism. The complete range offers ergonomic operation thanks to advanced technology: the high-quality 2-component plastic handle with a pump lever behind the rails, ensuring a secure grip from both directions; and the release lever integrated into the handle for quick adjustment of the sliding bracket and release of the clamp. Here, modern aesthetics go hand in hand with a long service life: through the use of high-quality materials such as glass-fibre-reinforced polyamide for the upper and lower sections, as well as refined and shot-blasted steel for the hollow profile rail; the plastic housing of the grip mechanism protects against dust and debris. Can be converted for spreading, without tools, for EZM, EZL and EZXL models thanks to the simple release mechanism with a push-button on the upper section. Ergonomically shaped two-component plastic handle with pump mechanism and integrated release lever behind the rails. Rubber protective caps with cross-prism for secure support of round, sharp and angular parts. One-handed operation without requiring much force
Leather carrying strap.
Carrying straps are used when it is not possible to use vacuum lifts and hoisting equipment. Reasons for this may include impassable terrain, non-gas-tight surfaces or textured surfaces. The carrying strap is made of leather, 1100 mm long and 70 mm wide.Carrying straps are carrying aids and not PPE (personal protective equipment). Therefore, CE marking is not required.Application note:Lifting straps are not suitable for lifting loads using forklift trucks, cranes and similar equipment. Check for damage before use. Only use undamaged straps.
Olfa Premium snap-off knife.
Genuine Olfa blades with a stainless steel blade lining. The blade width of the snap-off blade is 18 mm.This high-quality blade is a multi-purpose snap-off blade suitable for all occasions. The sharp and durable blade can be secured using the wheel locking system.
PALU 568 spatula, 7 mm, brown, made from Vulkollan
The jointing trowel is used for the professional and skilful application of sealant joints. The four sides of the finishing trowel offer different angles. They are cut individually to create the required joint widthSmoothing creates a visually appealing joint that also meets the technical requirements when carried out correctly.Application note:Observe the relevant technical guidelines and standards.
Perfect Joint Tooling Agent, 500 ml
Ready-to-use smoothing agent for joint sealants.* Smoothing agent for sealants* Ready-to-use solution: the product is already at the correct concentration and can be used straight away without dilution* Completely pH-neutral* Non-corrosive to sealant* Leaves no stains after rinsing* Does not contain solvents or acids* Does not damage the most common surfaces
Plastic window scraper with wooden handle
Glazing tool for everyday use. For easy and accurate installation of various glazing units. This glazing tool is made of impact-resistant plastic, fitted with a wooden handle and is particularly sturdy. (Also available in an all-wood version: BO 5165000, or in an all-plastic version: BO 5165301). Veribor® is a quality brand of the Bohle Group. The products are developed and manufactured exclusively in Germany – with particular attention to high safety standards and ergonomics. They are free from carcinogenic hydrocarbon compounds (PAHs).
Portman™ XL
CARRYMATE® Portman™ XL: Swivelling lifter for doors, panels and boards (lifts up to 120 kg), with integrated tilt compensation lever. Lifts, swivels and lowers.Ideal for installing doors, including fire doors, windows, furniture, plasterboard and partition walls. The perfect tool for joiners, glaziers, painters, locksmiths, households, etc.The integrated tilt compensation lever ensures that the load remains at a 90-degree angle and prevents it from falling towards you. Sturdy steel construction Lifts up to 120 kg Lifting, rotating and lowering "Foot control" Integrated tilt compensation lever
Premium "Don Carlos" chopping knife
Cutters are used to remove old sealant residue from the groove. When used in combination with the correct sealant knives, sealant joints can be repaired to a professional standard. The “Don Carlos” brand offers professional-grade quality to meet the highest standards. The blade of the knife is angled from top left to bottom right.HS Code: 8211 92 00
Premium "Don Carlos" chopping knife.
Cutters are used to remove old sealant residue from the groove. When used in combination with the correct sealant knives, sealant joints can be repaired to a professional standard. The “Don Carlos” brand offers professional-grade quality to meet high standards. The blade of the knife is angled from the bottom left to the top right.Width 38 mm, blade length 100 mm.HS Code: 8211 92 00
Premium "Martor" glass scraper.
This high-quality glass scraper can be used to remove residue from all smooth surfaces. It is particularly suitable for shallow scraping angles and has a wide blade opening. The rounded shape ensures the handle fits comfortably in the hand. A tool designed for prolonged use.To replace the blade easily, the blade guard is slid to one side and removed. Once the work is complete, the blade guard is refitted. There is then no longer any risk of injury.Your Benefits:Tool-free blade changeSuitable for right- and left-handed usersEyelet for attachmentErgonomic handleWith blade guard
Premium plastic window opener
Glazing tool for everyday use. For easy and accurate handling of various glazing units. This glazing tool is made of impact-resistant plastic, has a non-slip surface and is particularly stable. (Also available in an all-wood version: BO 5165000 or in a version with a plastic blade and wooden handle: BO 5165400) Veribor® is a quality brand of the Bohle Group. The products are developed and manufactured exclusively in Germany – with particular attention to high safety standards and ergonomics. They are free from carcinogenic hydrocarbon compounds (PAHs).
Silberschnitt® brass oil glass cutter.
The Silberschnitt® oil glass cutter for all standard glass cuts, with a brass handle. Whether you’re working with float glass or decorative glass, this glass cutter offers a wide range of applications and excellent value for money.The sturdy handle with integrated oil reservoir ensures that the cutting head is always well-oiled for a high-quality cut. The knurled finish makes cutting even more enjoyable thanks to a secure grip and comfort. The wide cutting head is interchangeable and allows for precise cutting in any area.Your benefits:Solid brass handleExcellent value for money!Wide headplate